Versa-Vac M1

150 Ft. Meyer Standard Vacuum Hose Kit containing:
(1) 450PS321 – 4″ x 50′ Meyer Standard Vacuum Hose
(4) 450PS322 – 6″ x 25′ Meyer Standard Vacuum Hose
(1) 420Z-126 – Pick-up Tube w/Handles
(1) 421E-043 – 6″x4″ Hose Reducer
(3) 421E-049 – 6″ OD Sleeve Connectors
(10) 450PT009 – Adjustable Hose Clamps, 2″ – 7″ dia.

Standard Vacuum Hose, 6″ X 25′ for use with the Meyer Pro insulation removal vacuum models, Versa-Vac and Versa-Vac M1.

Meyer Standard Vacuum Hose, 4″ X 50′ for use with the Meyer Pro portable insulation removal vacuums (Versa-Vac, Versa-Vac M1, and Vantage-Vac).

Meyer Premium Duty insulation removal bags, packaged in a box of 10, are 4′ x 6′ and hold up to 75 cubic ft. of heavy-duty material. Now 35% stronger made from spun bonded polypropylene material with reverse stitched seams for a better, stronger, tear-resistant bag. Bags have a 10″ collar for easy on/off. Can be used with the Meyer Versa-Vac OS and Vantage-Vac insulation removal vacuums.

Meyer insulation removal bags, packaged in a box of 20, are 4′ x 6′ and hold up to 75 cubic ft. of heavy-duty material. Now 35% stronger made from spun bonded polypropylene material with reverse stitched seams for a better, stronger, tear-resistant bag. Bags have a 10″ collar for easy on/off. Can be used with the Meyer Versa-Vac OS and Vantage-Vac insulation removal vacuums.

Premium Vacuum Hose, 4″ X 50′

Adjustable Hose Clamp, 2″-7″ Dia.

Inlet Reducer, 6″ X 4″

Premium Vacuum Hose, 6″ X 25′

M1 Versa-Vac Chopper fan wheel for 1 7/16″ PTO shaft

Safety Switch for the Inlet or Outlet on the Meyer Versa Vac

12 Volt Battery

Rear 8″ Caster Wheel for the Versa Vac

Front 8.25″ Solid Core Versa Vac Wheel

150 Ft. Premium Vacuum Hose Kit containing:
(1) 450PS324 – 4″ x 50′ Premium Vacuum Hose
(4) 450PS325 – 6″ x 25′ Premium Vacuum Hose
(1) 420Z-126 – Pick-up Tube w/Handles
(1) 421E-043 – 6″x4″ Hose Reducer
(3) 421E-049 – 6″ OD Sleeve Connectors
(10) 450PT009 – Adjustable Hose Clamps, 2″ – 7″ dia.

Inlet reducer from 8″ diameter opening to 6″ hose diameter.

The exclusive Meyer Debris Guard dissipates the energy of the projectile and drops the contamination into the disposal bag. The all new Meyer Debris Guard brings an unprecedented level of safety to insulation vacuums. The debris guard dissipates the energy of non-insulation contamination projectiles and drops them into the disposal bag. This innovation reduces the possibility of a split disposal bag and the resulting unnecessary clean up.

The Meyer Interceptor is designed to extend the life of the vacuum wheel, housing, hose, and the vacuum’s engine. The Interceptor protects the vacuum by deflecting foreign materials that are entrained in the air stream into a removable catch tray at the base of the device to help prevent these materials from entering the vacuum and causing damage.

An attic can contain all sorts of materials such as nails, screws, roofing materials, mortar and wood scrap. These materials are normally deposited in the attic prior to the original installation of the insulation material. This foreign debris is easily vacuumed along with the damaged insulation during the removal process. The Meyer Interceptor reduces the risk of costly repairs and decreased service life of the vacuum.

The M1 liner for the Versa-Vac is a bolted-on wear liner made out of a UHMW material. The liner protects the scroll of the machine, extending the life of the vacuum, and can be easily replaced when worn down.

The pickup tube works as an extension of the 4” hose attached to your insulation vacuum. It is angled tubing with a handle to help remove insulation.

Adapter used to reduce the hose diameter from 8″ OD to 6″ OD hose diameters for use with the Porta-Vac and Zephyr air duct cleaning vacuums.

A metal sleeve connector is used to join two lengths of 6-inch hose together.

Gas Tank Assembly

a metal sleeve connector is used to join two lengths of 4-inch hose together.