Meyer Pro Zephyr XL Air Duct Cleaning Vacuum

Desiccant Refill Material, 1 Gallon Containers. This desiccant changes color as it absorbs water, making it easy to know when a change is necessary. Blue = Dry, Pink = Wet. Reuse this desiccant after baking the moisture out in an oven. Use this refill material with the 5-Stage Desiccant Dryer, P/N 450DC071.

The 5-Stage Desiccant Air Dryer and Oil Separator is an important add-on piece of equipment for your Duct Cleaning or Dryer Vent Cleaning operation. Removes the moisture and vaporized oils from the air stream to prevent freezing air lines in cold weather, recontaminating clean ducts, and spraying moisture into areas that are water sensitive. The Desiccant Dryer comes with simple L-Brackets for mounting. 40 micron water removing filter with 9 oz. bowl, sight glass, and overnight drain; .01 micron oil removing filter with 9 oz. bowl, sight glass, and overnight drain; 1 gallon desiccant filter to remove all water; Filter/Regulator with 3 micron filter, 9 oz. bowl, and sight glass to protect the regulator from any desiccant dust, and regulator gauge; Unit comes with ball valve and 1 gallon of desiccant beads.

The 5′ Medium Flexible Hurricane Rods are the ideal tool for compressed air cleaning of ductwork in residential & light commercial settings. Use the 5′ Medium Hurricane Rods to connect extensions to reach down-branch ductwork up to 30′ in length.

The 5′ Flexible Hurricane Rod is the ideal tool for compressed-air cleaning of ductwork in residential & light commercial settings. Use the 5′ Flexible Hurricane Rods to connect extensions to reach down-branch ductwork up to 30′ in length.

The 7.5 HP, 230V, 3-Phase Tankless Screw Air Compressor provides all the benefits of portability in a building, efficiency, constant air flow, low noise factor, and a reasonable price all into one compact unit. The compressor is built on a portable caster cart. It provides 30 CFM of constant airflow at 150 PSI, for compressed air performance that even the most taxing air duct cleaning crews need. The unit is ideal for running compressed air tools from the Hurricane, 1/2″ Typhoon, Viper, Scorpion, and Dust-Devil product lines. The compressor can become even more productive with an in-line surge tank of 30-60 gallons to maintain higher line pressures and provide compressed tool performance for up to 3 users. The compressor is also available mounted on a tank for semi-permanent installation, not shown in the picture.

The portable 14 HP Tankless Screw Air Compressor provides all the benefits of efficiency, constant air flow, low noise factor, and a reasonable price all into one compact unit. The compressor is built on a 3-wheel portable cart with a locking caster and push/pull handle. It provides 30 CFM of constant airflow at 150 PSI, for compressed air performance that even the most taxing air duct cleaning crews need. This is ideal for running compressed air tools from the Hurricane, 1/2″ Typhoon, Viper, Scorpion, and Dust-Devil product lines. The Compressor can become even more productive with an in-line surge tank of 30-60 gallon to maintain higher line pressures and provide compressed tool performance for up to 3 users.

The Champion Truck Mount Air Compressor is powered by a Honda Engine, is packaged with a 30-gallon tank, and is capable of tank pressures up to 250 PSI. For applications where cleaning tools require large volumes of air, extra tank pressure acts as a larger storage vessel to reduce the run time on smaller systems. Product is manufactured in and ships from the Champion facility in the Chicago, IL area. Allow 7 days for package production. Use this air compressor for residential and commercial jobs for any cleaning application with compressed air whip systems like the Hurricane.

The 2 HP Portable Electric Air Compressor produces 7 CFM @ 125 PSI. The 10 gallon tank provides air storage suitable for a single technician to tackle residential dryer vent cleaning jobs with select Hurricane tools.

This Compressed Air Dryer Vent Cleaning Kit is designed for contractors who want to clean 4″ Residential Dryer Vents with compressed air. This kit includes a 20′ Hurricane Line, Forward and Reverse Duct Ball, and a (2) Standard 30′ Dryer Vent Line with Trigger. Operation of this kit is best when powered by an air compressor capable of producing at least 15 CFM @ 175 PSI.

The Residential Hurricane Light Package includes the compressed air whips and blow nozzles needed to get started cleaning Air Ducts. This kit comes complete with two lead lines and 6 compressed air whips/nozzles.

Use the Hurricane Tool Riser Ball to make your Hurricane and compressed air duct cleaning tools more effective within the duct. Just by raising the Hurricane compressed air tool over the duct surface, the blast of air or whip tentacle can move more freely and provide a better air scrubbing technique. Standard Hurricane/Rectus plug and coupler attachments. Use a Hurricane Line (450DC033/450DC034) or compatible item to interface this item with 1/4″ standard interchange airline fittings.

The Forward Spinning Duct Ball with 4″ Lead is a versatile tool for residential and light commercial Air Duct Cleaning. The Forward Spinning Duct Ball creates a high-velocity air vortex that easily cleans ducts contaminated with dirt, dust, and lint. The Forward Spinning Duct Ball is compatible with the Hurricane Whip System. Spinning Duct Ball components are designed for intermittent use. Use a Hurricane Line (450DC033/450DC034) or compatible item to interface this item with 1/4″ standard interchange airline fittings.

The Reverse Spinning Duct Ball with 25′ Lead is a versatile tool for both Air Duct Cleaning and Dryer Vent Cleaning. The Reverse Spinning Duct Ball creates a high-velocity air vortex that easily cleans ducts contaminated with dirt, dust, and lint. The Reverse Spinning Duct Ball is compatible with the Hurricane Whip System. Spinning Duct Ball components are designed for intermittent use. Use a Blow Gun Trigger (450DC262) or compatible item to interface this item with 1/4″ standard interchange airline fittings.

The Reverse Spinning Duct Ball with 4″ Lead is a versatile tool for both Air Duct Cleaning and Dryer Vent Cleaning. The Reverse Spinning Duct Ball creates a high-velocity air vortex that easily cleans ducts contaminated with dirt, dust, and lint. The Reverse Spinning Duct Ball is compatible with the Hurricane Whip System. Spinning Duct Ball components are designed for intermittent use. Use a Hurricane Line (450DC033/450DC034) or compatible item to interface this item with 1/4″ standard interchange airline fittings.

The 3/8″ dia.  x 100 ft. long compressed air hose is rated for 300 PSI and comes with standard 1/4″ airline fittings. On the male connector side, this hose has a strain relief to extend its life at the connection site.

The Hurricane Forward Flow Duct Ball provides a gentle cleaning technique that can be used on many types of ductwork and in many situations. A Forward Flow Duct Ball is ideal for air-sweeping after any duct-brushing procedure. Use a 12- hole Hurricane Forward Flow Duct Ball to increase air flow and performance compared to a 6-Hole duct ball. Use a Hurricane Line (450DC033/450DC034) or compatible item to interface this item with 1/4″ standard interchange airline fittings.

The Hurricane Reverse Flow Duct Ball provides a gentle cleaning technique that can be used on many types of ductwork and in many situations. A Reverse Flow Duct Ball is ideal for air-sweeping after any duct-brushing procedure. Use a 12- hole Hurricane Reverse Flow Duct Ball for increased air flow and performance compared to a 6-Hole duct ball.Use a Hurricane Line (450DC033/450DC034) or compatible item to interface this item with 1/4″ standard interchange airline fittings.

The Hurricane is the favorite compressed air cleaning system of duct cleaners nationwide. The Hurricane provides a 30 ft. flexible, one-piece hose that is lined with steel tape to provide the precise amount of rigidity to push down long runs without trouble.

The Hurricane is the favorite compressed air cleaning system of duct cleaners nationwide. The Hurricane provides a 20 ft. flexible, one-piece hose that is lined with steel tape to provide the precise amount of rigidity to push down long runs without trouble.

The Hurricane Register Cover Wand Tool is ideal for reaching through tight spaces to perform compressed air cleaning. Use the Register Cover Wand to reach through painted-on floor registers or linear difusers. Use a Hurricane Trigger Valve (450DC262) or compatible item to interface this item with 1/4″ standard interchange airline fittings.

The Standard Hurricane Dryer Vent Line is a 30′ flexible tubing with a high velocity reverse bullet. The Dryer Vent Line requires a Dryer Vent Line Trigger (450DC262) or Hurricane Line (450DC033/450DC034) for operation. The Dryer Vent Line propels itself through ductwork, breaking clogs and blowing loose material back through the opening. Use a Hurricane Trigger Valve (450DC262) or compatible item to interface this item with 1/4″ standard interchange airline fittings.

The Heavy-Duty Hurricane Dryer Vent Line is a 30′ flexible tubing with a high velocity reverse bullet. The Heavy-Duty Dryer Vent Line requires a Dryer Vent Line Trigger (450DC262) or Hurricane Line (450DC033/450DC034) for operation. The Heavy-Duty Dryer Vent Line propels itself through ductwork, breaking clogs and blowing loose material back through the opening. Heavy-Duty Line is designed for extreme heat conditions. Use a Hurricane Trigger Valve (450DC262) or compatible item to interface this item with 1/4″ standard interchange airline fittings.

The 6-Hole Hurricane Reverse Flow Duct Ball offers a gentle cleaning method suitable for many types of ductwork and in various situations. A Reverse Flow Duct Ball is ideal for air-sweeping after any duct-brushing procedure. Use a Hurricane Line (450DC033/450DC034) or compatible item to interface this item with 1/4″ standard interchange airline fittings.

The 6 Hole Hurricane Forward Flow Duct Ball provides a gentle cleaning technique that can be used on many types of ductwork and in many situations. A Forward Flow Duct Ball is ideal for air sweep after any duct brushing procedure. Use a Hurricane Line (450DC033/450DC034) or compatible to interface this item with 1/4″ standard interchange airline fittings.

The Hurricane Reverse Spider Whip has eight tentacles and can be used in the reverse direction. The Hurricane Spider Whip has a better coverage rate than a single or triple whip, but less aggressive whipping action. This tool is ideal for cleaning trunk lines or main ducts. It is recommended to use 2-1/2″ hole saw and a duct plug for access openings. Use a Hurricane Line (450DC033/450DC034) or compatible to interface this item with 1/4″ standard interchange airline fittings.